TOUR DE LUXE. Guitar tube preamp.

TOUR DE LUXE is a tube guitar prewamp for pro usage. Tube preamp for professional use.

There are 3 channels in the preamp: clean, crunch and lead. Built-in screamer, volume boost, effects loop and reverb.

Guitar amp outputs with cabinet (combo) and line-in (built-in speaker simulator)

Clean Channel: Toggle switch BRIGHT (off to play with external pedals) and MODE to select the desired basic tone character.

Knobs: BASS, MIDDLE, TREBLE, VOLUME to adjust tone and volume.

The CRUNCH channel is used primarily for rhythmic overdrive.

Controls: GAIN - overdrive value control, VOLUME - channel volume level, BASS, MIDDLE, TREBLE, PRESENCE - 4-band tone control.

The LEAD channel is used primarily for modern rhythmic and solo overdrive.

Controls: GAIN - overdrive value control, VOLUME - channel volume level, BASS, MIDDLE, TREBLE, PRESENCE - 4-band tone control.

SCREAMER (the so-called "warmer") is assigned by the SCREAMER toggle switch on each of the channels separately and is activated when playing when the SCREAMER button is pressed and its indicator is lit. those. if in a particular song the screamer is needed only for solo, then it is enough to turn on the .SCREAMER toggle switch on the lead channel in advance and press the SCREAMER button so that its indicator lights up, then when the lead channel is turned on, the screamer will turn on automatically, and when you switch to other channels, it will automatically turn off. In this case, if you connect an external screamer or another effect - for example, WAH-WAH - to the SCREAMER IN and OUT jacks, in this case, instead of the built-in screamer, an external effect will be connected on the selected channel / channels. The difference compared to the effects loop is that the screamer (or an external effect connected to its jacks) is technically connected BEFORE the channels directly after the guitar, and the effects loop - after the channels.

Similarly, it is assigned and activated by the corresponding BOOST (volume up) button with its own knob and FX LOOP (sequential effects loop) independently on each channel

REVERB - background reverb for all channels with its own volume controls.

OPTIONS: a remote footswitch duplicating all buttons and light indication, and a guitar cable extension for connecting a guitar through a footswitch. To activate the footswitch, turn on the FOOTSWITCH toggle switch.

Tubes 12AX7 / ECC83 - 2 pieces.

Powered by AC 230V.

Dimensions may vary slightly. housings are made by hand footswitch: 250x100mm preamp: 400x180mm preamp weight with footswitch and cables about 4.5kg